Ultrasonic Cutter - quickly cuts TEM discs (2,3 mm or 3 mm in size) from hard or brittle materials ranging from  <40 µm to 1 mm in thickness. Disc Grinder - for mechanically pre-thinning of disc specimens with high quality and uniform thickness. Dimple Grinder - mechanically reduce, with minimal damage, the central region of a typical 100 µm thick, 3 mm diameter specimen blank to a few microns.

Precision Ion Polishing System PIPS 691 - designed to produce high-quality TEM specimens with exceptionally large, clean, electron-transparent areas. Ion polishing is done by two ion guns with variable-angle. System with using of liquid nitrogen cold stage and CCD imafing system. Continous adjustment of beam energy from 100eV to 6 kV Two Penning ion guns with milling angle +10° to -10° Rotation variable from 1 rpm to 6 rpm

Vacuum Evaporator JEE-420T - for coating of various specimens that are suitable for high resolution observation using transmisssion and scanning electron microscopes. It is useful in rapid preparation of fine-grain TEM specimen support films by carbon evaporation. Turbo molecular pump 7x10-5 Pa or less Tilting and rotation possibility of samples Film thickness monitor

Turbo-Pumped Sputter Coater/Carbon Coater Q150T - compact turbomolecular-pumped coating system suitable for SEM, TEM and many thin film applications. High vacuum turbo pumping allows sputtering of a wide range of oxidizing and non-oxidizing metals suitable for SEM, high resolution FE-SEM and also for many thin film applications. Precise thickness controlled using film thickness monitor Fully automatic touch screen control Variable angle ’Rota-cota’ rotary planetary stage with 50 mm ø specimen platform

Applications:

Contact

IMR SAS
Watsonova 47, 040 01 Košice
Tel.: +421-55-7922 453
Fax: +421-55-7922 408
www.imr.saske.sk