Final Programme - download PDF
|
|
|
Sunday, September 29, 2013 |
|
15:00 |
|
Registration of the participants |
|
19:00 – 21:00 |
|
Welcome Dinner |
|
|
|
Monday, September 30, 2013 |
|||
|
09:00 – 09:10 |
|
Opening Remarks |
|||
|
09:10 –12:40 |
|
Section I. |
|||
|
|
|
Section Chairs: R. Danzer, P. Šajgalík |
|||
|
09:10 – 09:55 |
|
George D.Quinn
Failure analysis of a 41 meter long neutron beam line tube"
|
|||
|
09:55 – 10:40 |
|
Stephan Mattai
Rock fracture from the micrometer to kilometer scale |
|||
|
10:40 – 11:10 |
|
Coffee Break |
|||
|
11:10 – 11:55 |
|
Richard Bradt Estimating the effective mass of a crack in soda-lime-silica glass using fractography as the basis for parameter estimation |
|||
|
11:55 - 12:40 |
|
Richard Todd Fracture of aligned and continuous MWCNT/glass-ceramic nanocomposites |
|||
|
12:40 – 14:00 |
|
Lunch |
|||
|
14:00-17:50 |
|
Section II. |
|||
|
|
|
Section Chairs: R. Morrell, G.D. Quinn |
|||
|
14:00 – 14:30 |
|
Robert Danzer
What is tensile strength and how can it be measured
|
|||
|
14:30 – 14:50 |
|
Hagen Klemm
Failure of silicon nitride at elevated temperatures –a fractographic study
|
|||
|
14:50 –15:10 |
|
Walter Harrer
Fractography of biaxial tested Si3N4
|
|||
|
15:10 –15:30 |
|
Tanja Lube, Iyas Khader, Andreas Kailer, Ulrich Degenhardt, Karl Berroth, Karl-Heinz Lang, Claudius Wörner Fatigue behaviour and fatigue fracture in silicon nitride |
|||
|
15:30 – 16:00 |
|
Coffee Break |
|||
|
|
|
Section Chairs: R. Bradt, R. Todd |
|||
|
16:00 – 16:30 |
|
K. Gopalakrishnan, John. J. Jr. Mecholsky
Quantitative Fractography of Mixed Mode Fracture in Glass and Ceramics
|
|||
|
16:30– 16:50 |
|
Raul Bermejo, Zdenek Chlup, Oldrich Sevecek, Robert Danzer
Understanding the propagation of cracks in ceramic laminates
|
|||
|
16:50 – 17:10 |
|
Peter Supancic
Exact implementation of subcritical crack growth into a Weibullian strength distribution- theory and experiments
|
|||
|
17:10 – 17:30 |
|
Martin Trunec
Co-extruded layered ceramics with modified mechanical properties
|
|||
|
17:30-17:50 |
|
Frantisek Lofaj
Scratch resistance study in thin nanocomposite WC-C coatings |
|||
|
18:00 |
|
Dinner |
|||
|
20:00 |
|
Poster section Section Chair: J. Dusza, Cs. Balázsi |
|||
|
|
|
|
|||
|
|
|
Tuesday, October 1, 2013 |
|||
|
9:00 – 12:30 |
|
Section III. |
|||
|
|
|
Section Chairs: H. Klemm, T. Lube |
|||
|
9:00 – 09:30 |
|
Gerold Schneider Fracture behaviour of dental enamel
|
|||
|
09:30 – 09:50 |
|
Csaba Balázsi Examination of nanostructured hydroxyapatite bioceramic
|
|||
|
09:50 – 10:10 |
|
Roger Morrell, Robert Danzer
Assessing failures in ceramic HIP systems
|
|||
|
10:10 – 10:30 |
|
Katalin Balázsi Mechanical and Tribological behaviour of TiC and TiC/HAp bioceramics |
|||
|
10:30-11:00 |
|
Coffee Break |
|||
|
11:00 -11:30 |
|
Jakob Kuebler, N. Orlovskaya, M. Lugovy, G. Subhash, M. Neubert, V. Subbotin, R. Stadelmann, C.G. Aneziris, T. Graule
Mechanical properties of a ZrB2-30wt.% SiC ceramic composite
|
|||
|
11:30 -11:50 |
|
Tomaz Kosmac, Ales Dakskobler, Andraz Kocjan Interrelationship between sintering conditions, microstructure, phase composition and characteristic properties of 3 mol% Y-TZP ceramics |
|||
|
11:50 – 12:10 |
|
Petra Gaalová Corrosion in acidic beverages and micromechanical properties of human teeth |
|||
|
12:10 – 12:30 |
|
Luca Bertolla
Preparation and characterization of novel composite bioglass porous scaffolds reinforced with boron nitride nanotubes for hard tissue engineering |
|||
|
12:30-14:00 |
|
Lunch |
|||
|
14:00-17:30 |
|
Section IV. |
|||
|
|
|
Section Chairs: J. Kuebler, G. Schneider |
|||
|
14:00 – 14:30 |
|
K. Mingard, B. Roebuck, Roger Morrell, A. Betzwar-Kotas, H. Danniger, B. Weiss
Gigapixel imaging of hardmetal fracture surfaces
|
|||
|
14:30 – 14:50 |
|
Zbigniew Pedzich
Cavitation wear of ceramic phases
|
|||
|
14:50 – 15:10 |
|
Pavol Hvizdoš
Wear damage in Si3N4-C composite systems
|
|||
|
15:10 – 15:30 |
|
Maria Maros B., A.K. Németh Influence of the graphene additives on the wear behaviour of silicon nitride nanocomposites during pin-on-disc tests |
|||
|
15:30 – 16:00 |
|
Coffee Break |
|||
|
|
|
Section Chairs: D. Galusek, R. Bermejo |
|||
|
16:00 – 16:30 |
|
Dov Shermann
The origin of fracture surface instabilities in silicon crystal |
|||
|
16:30 – 16:50 |
|
Zdeněk Chlup
Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric |
|||
|
16:50 – 17:10 |
|
Julien Magnien, G. Khatibi, A. Schiessl, A. Schingale, B. Weiss
Assessment of mechanical reliability of surface mounted devices by an accelerated shear fatigue test technique |
|||
|
17:10 – 17:30 |
|
Felix Fleischhauer
Failure analysis of electrolyte supported solid oxide fuel cells |
|||
|
19:00 |
|
Conference Gala Dinner |
|||
|
|
|
|
|||
|
|
|
Wednesday, October 2, 2013 |
|
||
|
09:00 – 12:10 |
|
Section V. |
|
||
|
|
|
Section Chairs: Z. Pedzich, D. Shermann |
|
||
|
09:00 – 09:20 |
|
R. Bermejo, I. Kraleva, R. Morrell, C. Krautgasser, F. Aldrian, P. Supancic, R. Danzer Factors affecting the strength distribution in glass-ceramic composties |
|
||
|
09:20 – 09:40 |
|
Harshit Porwal, Peter Tatarko, Salvatore Grasso, Aldo R. Boccaccini, Ivo Dlouhý, Mike J. Reece
Toughened glass and ceramic matrix composites by graphene addition |
|
||
|
09:40 – 10:00 |
|
Miroslav Hnatko
Preparation and properties of SiC/CNT composite by catalytic CVD.
|
|
||
|
10:00 – 10:20 |
|
Halyna Volkova, Yurij Podrezov, Volodimir Filipov
The influence of Ti addition on fracture toughness and failure of directionally solidified LaB6-ZrB2 eutectic composite with monocrystalline matrix
|
|
||
|
10:20 – 10:50 |
|
Coffee Break |
|
||
|
10:50-11:10 |
|
Hynek Hadraba
Influence of particle arrangement during electrophoretic deposition on mechanical properties of alumina and zirconia
|
|
||
|
11:10-11:30 |
|
Csaba Balázsi
Ceramic particle reinforced aluminum matrix nanocomposties: preparation and characterization |
|
||
|
11:30 – 11:50 |
|
Martin Michálek
Al2O3/ZrO2/MWCNT composites with improved fracture toughness and high Young modulus
|
|
||
|
11:50 – 12:10 |
|
Milan Parchovianský, D. Galusek, J. Sedláček, P. Švančárek, M. Kašiarová, J. Dusza, P. Šajgalík
Effect of the volume fraction of SiC particles on the fracture mode, microstructure and mechanical properties of hot pressed Al2O3/SiC micro/nano composites
|
|
||
|
12:10 |
|
Closing Remarks
|
|
||
|
12:30 |
|
Lunch |
|
||
|
|
|
Poster Section , Monday, September 30, 2013 |
||
|
1 |
R. Lach
|
Fracture behavior of alumina-YAG particulate composites
|
||
|
2 |
A. Blachucińska
|
The analysis of the pore volume fraction on a biomaterial ceramic coating intended for implants
|
||
|
3 |
M. Platek
|
Reconstruction of gigapixel stereometric maps of ceramic surfaces
|
||
|
4 |
Z. Wróbel
|
Fractal and multifractal analysis of the degree of biomedical ceramic porosity
|
||
|
5 |
O. Kedzia
|
Modelling the degree of porosity of the ceramic surface intended for imolants
|
||
|
6 |
W. Sapota
|
Assessment of possibilities of ceramic biomaterial fracture surface reconstruction using laser confocal microscopy and lenses dor long working distance
|
||
|
7 |
A. Lamza
|
Multifractal image analysis and pore detection on a stereometric measuring file of porous ceramic coating
|
||
|
8 |
S. Stach
|
Perlocation in modelling of the fracture path in ceramic biomaterials
|
||
|
9 |
M. Halasová
|
Fracture response of SIOC based composites on dynamic loading
|
||
|
10 |
A. Kovalčíková, Cs. Balázsi, J. Dusza, P.Kun
|
Thermal shock resistance of Si3N4/graphene composites estimated by indentation technique
|
||
|
11 |
L. Hegedusová L. Ceniga, J. Dusza
|
Contact strength and crack formation of in PVD-coated WC-CO hardmetal
|
||
|
12 |
A. Duszová
|
Indentation damage of WC-Co composites
|
||
|
13
|
J. Balko, A. Kovalčíková, Cs, Balázsi, P. Hvizdoš, J. Dusza
|
Effect of BN additon on fracture toughness and wear resistance of Si3N4/BN composites
|
||
|
14
|
M. Bľanda, L. Kvetková, J. Dusza
|
fracture and fracture toughness of Al2O3 mono and polycrystal
|
||
|
15 |
Z. Vilčeková, M. Kašiarová, K. Bodišová, M. Domanická, P. Šajgalík
|
Characteristic processing flaws of Si3N4 based biomaterials and their effect on fracture mechanical properties
|
||
|
16 |
O. Hanzel
|
Mechanical and functional properties of alumina-MWCNT composites
|
||
|
17 |
Zs. Maros , Cs. Felhő, B.M. Maros
|
Application of 2D-3D surface geometrical features in wear analysis of ceramics |
||
|
18 |
D.Y. Ezgi
|
Hierarchical fracture behavior of dental enamel
|
||
|
19 |
K. Balázsi
|
Hap and TiC/Hap nanomaterials for implants |
||
|
20 |
V. Kovaľ, J. Durišin, K. Csach, I. Škorvánek, P. Hvizdoš |
Phase evolution and microstructure of dysprosium substituted bismuth ferrite ceramics |
||
|
21 |
M. Michálková |
Si3N4/GNPs prepared by different homogenization techniques: impact on mechanical properties |
||
|
22 |
P. Hvičšová, F. Lofaj, M. Novák |
Scratch behavior of CrN coatings
|
||
|
23 |
A. Gubernat |
The effect of graphite nanolayers on fracture of monophase tungsten carbide sinters |
||
|
24 |
P. Rutkowski |
Mechanical and thermal properties of hot pressed B4C-Cr3C2-hBN materials |
||
|
|
|
|
||